A cubic yard of normal concrete weighs about 4,000 lb. At 150 lb per cubic foot the exact sum is 27 ft³ × 150 = 4,050 lb (≈ 2 short tons). Published densities run 140–150 lb/ft³, so a yard lands between about 3,780 and 4,050 lb.
Weight calculator
Type in the size of your pour. The weight is volume × density, using 150 lb/ft³ for normal concrete or 105 lb/ft³ (the middle of the 90–120 lb/ft³ lightweight range). The starting numbers are a 12 × 16 ft pad, 4 in thick.
The bag count is rounded up and assumes the 0.60 ft³ yield of an 80 lb bag. Estimates only: ask your supplier for the actual mix density.
Weight by amount
| Amount | Volume | Metric | Weight | Short tons | Kilograms |
|---|---|---|---|---|---|
| ¼ yard | 6.75 ft³ | 0.19 m³ | ≈ 1,013 lb | ≈ 0.51 | ≈ 459 kg |
| ½ yard | 13.50 ft³ | 0.38 m³ | ≈ 2,025 lb | ≈ 1.01 | ≈ 919 kg |
| 1 yard | 27 ft³ | 0.76 m³ | ≈ 4,050 lb | ≈ 2.03 | ≈ 1,837 kg |
| 2 yards | 54 ft³ | 1.53 m³ | ≈ 8,100 lb | ≈ 4.05 | ≈ 3,674 kg |
| 5 yards | 135 ft³ | 3.82 m³ | ≈ 20,250 lb | ≈ 10.13 | ≈ 9,185 kg |
| 10 yards | 270 ft³ | 7.65 m³ | ≈ 40,500 lb | ≈ 20.25 | ≈ 18,370 kg |
| 20 yards | 540 ft³ | 15.29 m³ | ≈ 81,000 lb | ≈ 40.50 | ≈ 36,741 kg |
Weights use 150 lb/ft³, the top of the normal-weight range, so they are on the safe side for loads. 1 cubic yard = exactly 27 cubic feet ≈ 0.7646 m³; 1 lb = exactly 0.45359237 kg. Updated 6 November 2026.
One yard, in bags
The QUIKRETE data sheet lists about 0.60 ft³ for an 80 lb bag, 0.45 ft³ for a 60 lb bag and 0.30 ft³ for a 40 lb bag. A cubic yard of 27 ft³ therefore takes about 45, 60 or 90 bags. Those 45 bags weigh 3,600 lb dry; the water you add on site makes up most of the gap to the 4,050 lb of finished concrete. Yields are approximate.
Slab weights
Volume is length × width × thickness (in feet), and weight is volume × 150 lb/ft³. Four common jobs:
- Volume
- 33.3 ft³
- Cubic yards
- 1.23
- 80-lb bags
- ≈ 56
- Volume
- 48.0 ft³
- Cubic yards
- 1.78
- 80-lb bags
- ≈ 80
- Volume
- 50.0 ft³
- Cubic yards
- 1.85
- 80-lb bags
- ≈ 84
- Volume
- 133.3 ft³
- Cubic yards
- 4.94
- 80-lb bags
- ≈ 223
Worked example: a 12 × 16 ft shed pad, 4 in thick. Thickness is 4 ÷ 12 = 0.333 ft, so volume = 12 × 16 × 0.333 = 64 ft³ (≈ 2.37 yd³). Weight = 64 × 150 = 9,600 lb, which is 4.8 short tons or about 4,354 kg. That needs about 107 bags (64 ÷ 0.60). If you plan 10% extra for uneven ground, which is our rule of thumb and not a standard, it becomes 70.4 ft³ and about 118 bags.
For a quick check by area, a slab weighs 150 × thickness (in feet) per square foot:
| Thickness | Per square foot | Per square metre |
|---|---|---|
| 3 in | ≈ 37.5 lb/ft² | ≈ 183 kg/m² |
| 4 in | ≈ 50.0 lb/ft² | ≈ 244 kg/m² |
| 5 in | ≈ 62.5 lb/ft² | ≈ 305 kg/m² |
| 6 in | ≈ 75.0 lb/ft² | ≈ 366 kg/m² |
| 8 in | ≈ 100.0 lb/ft² | ≈ 488 kg/m² |
Hauling a load
Full loads are weighed in tons. A 10-yard load is 10 × 4,050 = 40,500 lb of concrete, about 20 short tons, and the truck is on top of that. Ask the supplier for the loaded weight if your drive, culvert or septic lid has a limit.
A pickup works in bags, not yards. Find your payload on the label inside the driver door frame, subtract passengers and gear, then read across:
| Payload you have | Mixed concrete | 80 lb bags |
|---|---|---|
| 1,000 lb | ≈ 0.25 yd³ | 12 |
| 1,500 lb | ≈ 0.37 yd³ | 18 |
| 2,000 lb | ≈ 0.49 yd³ | 25 |
| 3,000 lb | ≈ 0.74 yd³ | 37 |
| 4,000 lb | ≈ 0.99 yd³ | 50 |
Bag counts are by weight (80 lb each). Mixed-concrete figures use 4,050 lb per yard.
Why the weight varies
Density depends on the aggregate (the stone and sand), the air trapped in the mix and the water used. The National Ready Mixed Concrete Association gives these ranges:
| Type | Density | Per cubic yard | Per m³ |
|---|---|---|---|
| Structural lightweight | 90–120 lb/ft³ | ≈ 2,430–3,240 lb | 1,440–1,840 kg |
| Normal weight | 140–150 lb/ft³ | ≈ 3,780–4,050 lb | 2,240–2,400 kg |
Water is about 62.4 lb/ft³, so a yard of it weighs about 1,685 lb and normal concrete is about 2.4 times heavier. Steel reinforcement adds some weight, so check the engineer’s figure for heavily reinforced work.
For comparison, a yard of concrete matches about 25 full half-barrel kegs. See how much a keg weighs.
FAQ
How many pounds is a yard of concrete?
About 4,000 lb (4,050 lb at 150 lb/ft³). Normal-weight concrete runs about 3,780–4,050 lb per yard.
How many tons is a cubic yard of concrete?
About 2 short tons (≈ 2.03 at 150 lb/ft³), or about 1.8 metric tons.
How much does a cubic foot of concrete weigh?
About 140–150 lb (≈ 63.5–68 kg).
How much does a cubic metre of concrete weigh?
About 2,240–2,400 kg, which is roughly 4,940–5,290 lb.
How much does a 4-inch slab weigh per square foot?
About 50 lb per square foot (150 lb/ft³ × 4/12 ft), or roughly 244 kg per square metre. A 6-inch slab is about 75 lb/ft².
How many bags of concrete make a yard?
About 45 bags of 80 lb mix (0.60 ft³ each), 60 bags of 60 lb mix or 90 bags of 40 lb mix. Yields are approximate.
How much does a 10-yard load of concrete weigh?
About 40,500 lb (≈ 20 short tons) of concrete, not counting the truck.
Can my truck carry a yard of concrete?
A yard is about 4,050 lb, which is more than the payload of many pickups. Check the payload label in the door frame; passengers and gear count against it.